GFK-160 Semi Automatic 2-3500ml Digital Control Water Juice Milk Filler Liquid Bottle Filling Machine
Premium Products
GFK-160 Semi Automatic 2-3500ml Digital Control Water Juice Milk Filler Liquid Bottle Filling Machine
1
2
3
4
5
6
机器产能 :1000瓶每小时
应用 :饮料
包装类型 :纸盒
包装材料 :木质
自动化程度 :半自动
动力类型 :Electric
电压 :220v, 220V 50hz/110V/60hz
原产地 :Guangdong, China
品牌 :sammi
尺寸(长×宽×高) :40*38 * 20MM
保修期 :1年
核心卖点 :使用寿命长
填充物料 :水, oil, juice
灌装精度 :1ML
机械测试报告 :可提供
视频出厂验货 :可提供
核心组件 :压力容器
材料 :不锈钢
姓名 :数字控制液体灌装机
型号 :GFK-160
填充范围 :3-3000ml
充填速度 :最大3.2升/分钟
类型 :罐装机
状态 :New
适用行业 :食品饮料加工厂, 餐饮店
展示厅地点（在海外哪些国家有样品间） :None
核心组件质保期 :1年
重量 :5 KG
MOQ :1 set
Price :$50-65 / set
Contact Now
Compact Digital Control Pump Liquid Filling Machine
Controled by micro-computer, fill liquid by setting the filling time and speed.
Filling Liquid From 3-3000ml very precisely.
Digital Panel, very easy to operate.
Technical Parameter:
Voltage: AC 180V-260V
Power: 30W
Filling Range: 3ml-3000ml
Max Flow Rate: 3.2L/min
Package Size: 400X380X200 (mm)
Weight: 5.5kgs
Max Suck Distance: 2meter
Anti-dripping Funtion: Available
Memory Function out of power: Available
Interior diameter of filling nozzle: 5mm (if you need smaller 3mm, please let us know.)
Characteristics:
1. Import single-chip microcomputer control, high efficiency, low power consumption
2. Automatic counting function, effectively control filling quantiy
3. LCD display, touch screen is very easy to operate
4. High filing accuracy
5. Wide Voltage range
6. Working performance is stable and can be used for long time
7. This can self-suck the liquid.
8. The pump can stand acid and alkali
9. Anti-dripping design.
10. Reasonable design, made of stainless steel, meet GMP requirement
Application:
suitable for low viscous liquid like water,oil,perfume,soft drink,milk,beverage,chemical liquid etc. Not suitable for very thick liquid ( like sauce, shampoo, detergent etc), or liquid containing small particles.
Note:the machine use silicone tube to suck liquid. If fill different liquid, it can suck water to clean the pump or it can change another tube to fill.
Installation and operation:
Take the small filter out of the part.and install it below the feeding tube,Take the plastic filling Nozzle out and install it in the feeding tube(Notice the triangel head connects the discharge tube),Take out the filling-heat stand and install it on the left of the machine as shows, put the filling head in the clip and tighten it by socket wrench,Connect the pedal switch with machine,and put the tube with filter below the liquid level inside the storeage tank, the position of tank should be lower than the machine,start to test the machine after all is ready.
